1.適用範圍: 加硬PC、加硬PMMA、噴PU表面、噴UV漆表面、金屬、玻璃、電鍍、電泳、氧化鋁、電解板、鋁塑板、烤漆、噴塑、噴粉、氨基烘漆面、丙烯酸漆面、PA塑料尼龍、電木、玻纖、玻璃鋼、樹脂、密胺、三聚氰胺；
2.稀釋劑: S-003專用稀釋劑；
3.用量:用300目網版每公斤約可印30平方米；
4.固化劑:要加10%固化劑,TA-9或TAB-007兩種固化劑；
5.幹燥方法:自然揮發幹燥的, 墨層表幹時間5-10分鐘：實幹時間在24小時以內。
註意事項
  1、試印確認符合要求後再批量生產。
 2、做好被印物的表面清除油脂及雜質工作，以促進附著效果。
 3、需要套色時，應在前顏色表幹或硬幹後再進行套色工作。
 4、附著力、硬度、耐酸性、耐油性、耐去漬油性、抗劃傷性、耐磨性等性能的檢測，需要墨層
      完全固化後方可檢測。
 5、未經允許情況下，不得將本系列油墨與其它類型油墨混用及配色。
 6、添加固化劑後的使用時限：加入固化劑後的油墨使用時間為4-6小時，環境溫度越高使用時間越短，剩余油墨不可回收。
 7、油墨，稀釋劑使用及儲存時嚴禁煙火。
1. scope: harden PC, hard PMMA, PU, UV surface spray spray paint surface, metal, glass, electroplating, electrophoresis, alumina, electrolytic plate, aluminum plate, paint, spray, spray, paint, acrylic amino baking paint, PA plastic, nylon, bakelite, glass fiber, glass fiber, resin, melamine melamine;
2. diluent: S-003 special diluent;
3. dosage: the 300 mesh net plate can be printed about 30 square meters per kilogram.
4. curing agent: to add 10% curing agent, TA-9 or TAB-007 two kinds of curing agent;
5. drying method: natural volatilization drying, ink layer table dry time 5-10 minutes: dry time in 24 hours.
Precautions
1. The test print confirms the batch production after it meets the requirements.
2, do a good job of removing oil and impurities on the surface of the printed material to promote the attached effect.
3, need to register, should be before the color table dry or hard after the registration work.
4, attachment, hardness, acid resistance, oil resistance, oil resistance, scratch resistance, abrasion resistance and other properties, and the need for the ink layer
Complete curing can be detected in the rear.
5. In the absence of permission, this series of ink can not be mixed with other types of ink and color matching.
6, the time limit for adding the curing agent is: the time of using ink after adding the curing agent is 4-6 hours, the shorter the time of using the environmental temperature is, the remaining ink is not recyclable.
7. Ink, the use and storage of diluents strictly prohibit fireworks.[本信息來自于今日推薦網]